Library service is available from Monday to Friday (09:00-12:00am; 02:00-05:00pm). The volumes can be consulted at the Dept. of Structures for Engineering and Architecture, via Claudio 21, 80125 Naples (Italy).

For further information about documentations, please contact the ACI Italy Chapter Secretary at

1408R-03Bond and Development of Strainght Reinforcing Bars in TensionACI.0,134
2121R-04Quality Management System for Concrete ConstructionACI. 0,2
3212.4R-04Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in concreteACI. 0,6
4303R-04Guide to Cast-in-Place Architectural ConcreteACI. 0,10
5332-04Requirements for Residential Concrete Construction and Commentary (ACI 332-04)ACI. 0,14
6440.1R-06Guide for the Design and Construction of Structural Concrete Reinforced with FRP BarsACI. 0,25
7440.3R-04Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete StructuresACI. 0,26
8440.4R-04Prestressing Concrete Structures with FRP tendonsACI. O,27
9524R-04Guide to Portland Cement-Based PlasterACI. 0,31
10207.1R-05Guide to Mass ConcreteACI. 0,3
11207.4R-05Cooling and Insulating Systems for Mass ConcreteACI. 0,4
12209.1R-05Report on Factors Affecting Shrinkage and Creep of Hardened ConcreteACI. 0,5
13301-05Specifications for Structural ConcreteACI. 0,8
14301-05Specifications for Structural Concrete (with selected ACI referencers)ACI. 0,42
15309R-05Guide for Consolidation of ConcreteACI. 0,11
16311.4R-05Guide for Concrete InspectionACI. 0,12
17334.3R-05Construction of Concrete Shells Using Inflated FormsACI. 0,16
18347.2R-05Guide for Shoring/Reshoring of Concrete Meultistory BuildingsACI. 0,18
19374.1-05Acceptance Criteria for moment Frames Based on Structural Testing and CommentaryACI. 0,22 ACI. 0,23
20423.3R-05Recommendations for Concrete Members Prestressed with Unbonded TendonsACI. 0,24
21506R-05Guide to ShotcreteACI. 0,28
22551.1R-05Tilt-Up Concrete Construction GuideACI. 0,32
23117-06Specifications for Tolerances for Concrete Construction and Materials and CommentaryACI. 0,1
24234R-06Guide for Use of Silica Fume in ConcreteACI. 0,7
25302.2R-06Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring MaterialsACI. 0,9
26325.13R-06Concrete Overlays for Pavement RehabilitationACI. 0,13
27332.1R-06Guide to Residential Concrete ConstructionACI. 0,15
28345.1R-06Guide for Maintenance of Concrete Bridge MembersACI. 0,17
29349-06Code requirements for Nuclear Safety-related Concrete Structures (ACI 349-06) and CommentaryACI.0,54
30350.3-06Seismic Design of Liquid-Containing Concrete Structures and CommentaryACI. 0,20
31350/350R-06Code Requirements for Environmental Engineering Concrete Structures and CommentaryACI.0,55
32360R-06Design of Slabs-on-GroundACI. 0,21
33523.1R-06Guide for Cast-in-Place Low-Density Cellular ConcreteACI. 0,30
34522R-06Pervious ConcreteACI. 0,29
35207.2R-07Report on Thermal and Volume Change Effects on Cracking of Mass ConcreteACI.0,56
36216.1-07Code requirements for determining Fire Resistence of Concrete and Masonry Construction AssembliesACI.0,57
37224.1R-07Causes, Evaluation, and Repair of Cracks in Concrete StructuresACI.0,58
38237R-07Self-Consolidating ConcreteACI.0,59
39341.3R-07Seismic Evaluation and Retrofit Techniques for Concrete BrigesACI.0,60
40349.1R-07Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant StructuresACI.0,61
41349.2R-07Guide to the Concrete Capac ity Design (CCD) Methos – Embedment Design ExamplesACI.0,62
42355.2-07Qualification of Post-Installed Mechanical Anchors in Concrete and CommentaryACI.0,63
43364.1R-07Guide for Evaluation of Concrete Structures before RehabilitationACI.0,64
44421.2R-07Seismic Design of Punching Shear Reinforcement in Flat PlatesACI.0,65
45437.1R-07Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance CriteriaACI.0,66
46439.3R-07Types of Mechanical Splices for Reinforcing BarsACI.0,67
47440R-07Report on Fiber-reinforced Polymer (FRP) Reinforcement for Concrete StructuresACI.0,68
48503.7-07Specification for Crack Repair by Epoxy InjectionACI.0,69
49548.8-07Specification for Type EM (Epoxy Multi-Layer) Polyer Overlay for Bribge and Parking Garage DecksACI.0,70
50121R-08Guide for Concrete Construction Quality Systems in Conformance with ISO 9001ACI.0,71
51201.1R-08Guide for Conducting a Visual Inspection of Concrete in ServiceACI.0,72
52201.2R-08Guide to Durable ConcreteACI.0,73
53209.2R-08Guide for Modeling and Calculating Shrinkage and Creep in Hardened ConcreteACI.0,74
54230.1R-09Report on Soil Cement Report ACI Committee 230ACI.0,138
55238.1R-08Report on Measurements of Workability and Rheology of Fresh ConcreteACI.0,75
56298.1R-08Report on Measurements of Workability and Rheology of Fresh ConcreteACI.0,76
57307-08Code requirements for Reinforced Concrete Chimneys and CommentaryACI.0,135
58309.1R-08Report on Behaviour of Fresh Concrete During VibrationACI.0,77
59318-08Building Code Requirements for Structural Concrete (ACI 318-08) and commentaryACI.0,78
60330R-08Guide for the Design and Construction of Concrete Parking LotsACI.0,79
61332-08Code Requirements for Residential Concrete and CommentaryACI.0,80
62346-09Specification for Cast-in-Place Concrete PipeACI.0,139
63371R-08Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel-Concrete Water Storage TanksACI.0,81
64421.1R-208Guide to Shear reinforcement for SlabsACI.0,82
65440.2R-08Guide for Design and Construction of Externally Bonded FRP System for Strengthening Concrete StructuresACI.0,83
66440.5-08Specification for Construction with Fiber Reinforced Polymer Reinforcing BarsACI.0,84
67440.6-08Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete ReinforcementACI.0,85
68506.1R-08Guide to Fiber-Reinforced ShotcreteACI.0,121
69506.5R-09Guide for Specifying Underground ShotcreteACI.0,140
70522.1-08Specification for Pervious Concrete PavementACI.0,86
71524R-08Guide to Portland Cement-Based PlasterACI.0,87
72530/530.1-08Building Code Requirements and Specification for mansory Structures and Related CommentariesACI.0,88
73544.3R-08Guide for Specifyung, Proportioning, and Production af Fiber-Reinforced ConcreteACI.0,89
74548.9-08Specification for Type ES (Epoxy Slurryr) Polymer Overlay for Bridge and Parking Garage DecksACI.0,90
75311.6-09Specification for Ready Mixed Concrete Testing ServicesACI.0,122
76439.4R-09Report on Steel reinforcement-Material Properties and U.S. AvailabilityACI.0,123
77549.3R-09Report on Glass Fiber-Reinforced Concrete PremixACI.0,124
78117-10Specification Tolerances for Concrete Construction and Materials ( ACI 117 – 10 ) and CommentaryACI.0,157
79214.4R-10Guide for Obtaining Cores and Interpreting Compressive Strength ResultsACI.0,158
80212.3R-10Report of Chemical Admixtures for ConcreteACI.0,178
81223R-10Guide for the Use of Shrinkage-Compensating ConcreteACI.0,179
82231R-10Report on Early-Age Cracking:Causes, Measurement, and MitigationACI.0,142
83301R-10Specifications for Structural ConcreteACI.0,180
84305R-10Guide to Hot Weather ConcretingACI.0,159
85306-R10Guide to Cold Weather ConcretingACI.0,181
86332-10Residential Code Requirements for Structural Concrete (ACI 332-10) and CommentaryACI.0,160
87350.5-12Specifications for Environmental Concrete StructuresACI.0,224
88351.2R-10Report on Foundations for Static EquipmentACI.0,161
89357.2R-10Report on Floating and Float-In Concrete StructuresACI.0,162
90360R-10Guide to Design of Slabs-on-GroundACI.0,163
91363R-10Report on High-Strength ConcreteACI.0,143
92421.2R-10Guide to Seismic Design of Punching Shear Reinforcement in Flat PlatesACI.0,164
93423.8R-10Report on Corrosion and Repair of Grouted Multistrand and Bar Tendon SystemsACI.0,182
94423.9M-10Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon GroutACI.0,165
95440.7R-10Guide for the Design and Construction of Externally Bonded Fiber-Reinforced Polymer Systems for Strengthening Unreinforced Masonry StructuresACI.0,166
96445.1R-12Report on Torsion in Structural ConcretreACI.0,218
97503.3-10Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and AggregateACI.0,1183
98522R-10Report on Pervious ConcreteACI.0,144
99544.5R-10Report on the Physical Properties and Durability of Fiber-Reinforced ConcreteACI.0,145
100546.2R-10Guide to Underwater Repair of ConcreteACI.0,167
101548.10-10Specication for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage DecksACI.0,168
102548.12-12Specification for Bonding Hardened Concrete and Steel to Hardened Concrete with an Epoxy AdhesiveACI.0,219
103207.5R-11Report on Roller-Compacted Mass ConcreteACI.0,0197
104308.1-11Specification for Curing Concrete An ACI StandardACI.0,198
105314.R-11Guide to Simplifield Design for Reinforced Concrete Buildings ( For Buildings of Limited size and Heght,based on ACI 318-11 and IPS-1, “Essential Requierements for Reinforced Concrete Buildings.)ACI.0,199
106318-11Building Code Requirementsfor Structural Concrete (ACI318-11)ACI.0,200
107345.R-11Guide for Concrete Highway Bridge Deck ConstructionACI.0,201
108355.4-11Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary (ACI 355.4-11)ACI.0,202
109363.2R-11Guide to Qualty Control and Assurance of High-Strength ConcreteACI.0,203
110369R-11Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and CommentaryACI.0,184
111548.4-11Specification for Latex-Modified Concrete OverlaysACI.0,204
112232.1R-12Report of Use of Raw or Processed Natural Pozzolans ConcreteACI:0,210
113303.R-12Guide to Cast-in-Place Architectural Concrete PracticeACI.0,205
114362.1R-12Guide for the Design and Construction of Durable Concrete Parking StructuresACI.0,211
115351.1R-12Report on Grouting between Foundations and Bases for Support of Equipment and MachineryACI.0,206
116408.2R-12Report on Bond of Steel Reinforcing Bars Under Cyclic LoadsACI.0,212
117440.R-12Guide Test Methods for Fiber-Reinforced Polymer (FRP) Composites for Reinforcing or Strengthening Concrete and Masonry StructuresACI.0,213
118543R-12Guide to Design, Manufacture, and Installation of Concrete PilesACI.0,192
119548.11R-12Guide for Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened ConcretesACI.0,214
120Build Code- 2013Building Code Requirements and Specification for Mansory Structures and Companion CommentariesACI.0.236
121224.4R-13Guide to Deign Detailing to MitigateACI.0,237
122228.2R-13Report on Nondestructive Test Methods for Evaluation of Concrete in StructuresACI.0.220
123229.R-13Report on Controlled Low-Strength MaterialsACI.0,221
124308-213.R-13Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight AggregateACI.0,222
125310.R-13Guide to Decorative ConcreteACI.0,2238
126345.2R-13Guide for Widening Highway BridgesACI.0,223
127347.3R-13Guide to Formed Concrete SurfacesACI.0,239
128372.R-13Guide to Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete StructuresACI0,229
129374.2R-13Guide for Testing Reinforced Concrete Structural Elements under Slowly Applied Simulated Seismic LoadsACI.0,225
130437.2-13Code Requirements for Load Testing of Existing Concrete Structures (ACI.437.2-13) and CommentaryACI.0,240
131440.8-13Specification for Carbon and Glass Fiber-Reinforced Polymer (FRP) Materials Made by Wet Layup for External Strengthening of Concrete and Masonry StructuresACI.0,241
132506.2-13Specification for ShotcreteACI.0,242
133515.2R-13Guide to Selecting Protective Treatments for ConcreteACI.0,226
134522.1-13Specification for Pervious Concrete PavementACI.0,227
135549.4R-13Guide to Design and construction of exterally Bonded Fabric-Reinfirced Cementitious Matrix ( FRCM ) Systems for Repair and Strengthening Concrete and Masonry structuresACI.0,230
136550.2R-13Design Guide for Connections in Precast Jointed SystemsACI.0,217
137550.3-13Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfyng ACI 374.1 ( ACI 550.3-13 ) and CommentaryACI.0,228
138562. -13Code Requierements for Evaluation,Repair and Rehabilitation of Concrete Buildings ( ACI 562 – 13 ) and CommentaryACI.0,215
139122.R -14Guide to Thermal Properties of Concrete and Masonry SystemsACI.0,245
140216.1 -14Code Requirements for Detemining FireResistance of Concrete and Masonry Construction AssembliesACI.0,246
141222.2R -14Report on Corrosion of Prestressing SteelsACI.0,247
142232.3R -14Report on High-Volume Fly Ash Concrete for Structural ApplicationsACI.0,248
143318. – 14Building Code Requirements for Structural Concrete (ACI 318-14) Commentary on Building code Requirements for Structural Concrete (ACI 318-14)ACI.0,249
144330.1 – 14Specification for Unreinforced Concrete Parking Lots and Site PavingACI.0,250
145332. -14An ACI Standard Residential Code Requirements for Structural Concrete (ACI 332 – 14) and CommentaryACI.0,243
146357.3R – 14Guide for Design and Construction of Waterfront and Coastal Concrete Marine StructuresACI.0,251
147423.4R – 14REPORT ON Corrosion and Repair of Unbonded Single-Strand TendonsACI.0,252
148423.7 – 14Specification for Unbonded Single-Strand Tendon MaterialsACI.0,253
149546.R – 14Guide to Concrete RepairACI.0,254
150548.13 – 14Specification for Bonding Fressh Concrete to Hardened Concrete with a Multi-Component Epoxy AdhesiveACI.0,255
151551.1R – 14Guide to Tilt-Up Concrete ConstrutionACI.0,256
152SP-02 (07)Manual of Concrete InspectionACI.0,141
153SP-4Formwork for ConcreteACI. 0,41
154SP-17(97)ACI Design Handbook – Design of Structural Reinforcede Concrete Elements in Accordance with the strenght Design Method of ACI 318-95ACI. 0,40
155SP-17(09)ACI Design Handbook – Design of Structural Reinforced Concrete Elements in Accordance with ACI 318-05ACI.0,125
156SP223Investigating Concrete-Selected Works of Bryant and Katherine MatherACI. 0,43
157SP-228Seventh International Symposium on the Utilization of High-Strength/High-Performance Concrete (Vol.1-2)ACI. 0,45
158SP-230Fiber Reinforced Polymer (FRP) Reinforcement Concrete Structures (Vol.1-2)ACI. 0,47
159SP-231Historic Innovations in Prestressed ConcreteACI. 0,49
160SP-232Punching Shear in Reinforced Concrete SlabsACI. 0,50
161SP-233CD(CD only) Workability of SCC:Roles of Its Constituents and Measurement TechniquesACI.0,91
162SP-2342006. Seventh CANMET/ACI. Durability of concreteACI. 0,51
163SP-2352006. Eighth CANMET/ACI. Recent advances in concrete technologyACI. 0,52
164SP-236CD(CD only) Deformation Capacity and Shear Strength of Reinforced Concrete Members Under Cyclic LoadingACI.0,92
165SP-237CD(CD only) Finite Element Analysis of Reinforced Concrete StructuresACI.0,93
166SP-238International Symposium on Confined ConcreteACI. 0,53
167SP-2398th CANMET/ACI International Conference on Superplasticizers and Other Chemical Admixtures in ConcreteACI. 0,44
168SP-240CD(CD only) Performance-Based Design of Concrete Buildiing for Wind LoadsACI.0,94
169SP-241CD(CD only) Conncrete Heat Development Monotoring, Prediction & ManagementACI.0,95
170SP-2429th Canmet/ACI Fly Ash ConferenceACI.0,96
171SP-2439th Canmet/ACI Int Conference on recent Advances in Concrete TechnologyACI.0,97
172SP-244CD(CD only) Thin Fiber and Textile Reinforced Cementitious SystemsACI.0,98
173SP-245CD(CD only) Case Histories and Use of FRP for Prestressing ApplicationsACI.0,99
174SP-246CD(CD only) Structural Implications of Shrinkage and Creep of ConcreteACI.0,100
175SP-247CD(CD only) Self-Consolidating Concrete for Precast Prestressed ApplicationsACI.0,101
176SP-248CD(CD only) Deflection and Stiffness Issues in FRC and Thin Structural ElementsACI.0,102
177SP-249Selected Landmark Paper Collection on Concrete materials ResearchACI.0,103
178SP-250CD(CD-Rom) Textile Reinforced ConcreteACI.0,104
179SP-251CD(CD-Rom) Design & Applications of Textile-Reinforced ConcreteACI.0,105
180SP-252CD(CD-Rom) Healt Monitoring System & Sensors for Assessing ConcreteACI.0,106
181SP-253CDACI/CANMET/IBRACON Intl Conference on High-Performance CD-ROMACI.0,107
182SP-255CD(CD-Rom) Designing Concrete Structures for Fire SafetyACI.0,126
183SP-256CD(CD-Rom) Internal Curing of High Performance Concrete: Lab and Field ExperiencesACI.0,127
184SP-257CD(CD-Rom) FRP Stay-In-Place Forms for Concrete StructuresACI.0,128
185SP-261Recent Advances in Concrete Technology and Sustainability IssuesACI.0,136
186SP-262Superplasticizers and Other Chemicaldmixtures in ConcreteACI.0,137
187SP-263Slag Cement ConcreteACI.0,129
188SP-264Serviceability of Concrete Members Reinforced with Internal/External FRP ReinforcementACI.0,130
189SP-265Shear and Torsion in Concrete StructuresACI.0,131
190SP-266Modeling as a Solution to Concrete ProblemsACI.0,132
191SP-267Nanotechnology of Concrete: The Next Big Thing Is SmallACI.0,133
192SP-268Fiber Reinforced Concrete in PracticeACI.0,154
193SP-269Concrete: The sustainable Material ChoiceACI.0,155
194SP-270Advances in the Material Science of ConcreteACI.0,156
195SP-271Structural Concrete in Performance-Based Seismic Design of BridgesACI.0,169
196SP-272Fiber Reinforced Self Consolidating Concrete : Research and ApplicationsACI.0,170
197SP-273Further Examples for the Design of Structural Concrete with Strut-and-Tie ModelsACI.0,171
198SP-274Symposium Four Decades of Progress in Prestressed Concrete and Thin Laminate CompositesACI.0,172
199SP-275Fiber-Reinforced polymer Reinforcement for Concrete Structures 10th International SymposiumACI.0,173
200SP-276Durability Enhancements in Concrete with Fiber ReinforcementACI.0,174
201SP-277Recent Advances Maintenance and Repair of Concrete BridgesACI.0,175
202SP-278Frontiers in the Use of Polymers in ConcreteACI.0,176
203SP-279Innovations in Fire Design of Concrete StructuresACI.0,177
204SP-280Advances in FRC Durability and Field ApplicationsACI.0,186
205SP-281Behavior of Concrete Structural Subjected to Blast and Impact LoadingsACI.0,187
206SP-282The Leading Adge of Pervious ConcreteACI.0,188
207SP-283Anderstanding Adhesive Anchors: Behavior, Materials, Intallation, DesignACI.0,189
208SP-284Andy Scanlon Symposium on Serviceability and Safety of Concrete Structures: from Research to PracticeACI.0,190
209SP-285Concrete Construction and Structural Evaluation: A Symposium Honoring Dov KaminetzkyACI.0,194
210SP-286A Fracture Approach for FRP-Concrete StructuresACI.0,195
211SP-287Recent Development in Reinforced Concrete Slab Analysis, Design, and ServiceabiblityACI.0,196
212SP-2882012 Tenth International Conference on Superplasticizers and Other Chemical AdmixuresACI.0,207
213SP-2892012 Twelft International conference on Recent Advances in Concrete Technology and Sustainability IssuesACI.0,208
214SP-290The Economics, Performance, and Sustainability of Internally Cured ConcreteACI.0,209
215SP-292Structural Healt Monitoring TechnologiesACI.0,232
216SP-293Reinforced Concrete Columns with High Strength Concrete and Steel ReinforcementACI.0,233
217SP-294Advances in Green Binder SystemsACI.0,234
218SP-295Recent Advances in the Design of Prestressed Concrete Piles in Marine Structures in Seismic RegionsACI.0,235
219Senza CodACI Manual of Concrete Practice 2006 (Index,Part.1-2-3-4-5-6)ACI. 0,33
220MCP-07Pack2007 Manual of Concrete Practice 6-Part Set/including MCPI07-Index(Hard Copy Only)ACI. 0,108
221MCP-08Pack2008 Manual of Concrete Practice 6-Part Set/including MCPI08-Index(Hard Copy Only)ACI. 0,114
222MCP-10Pack2010 Manual of Concrete Practice 6-Part Set/including MCPI10-Index(Hard Copy Only)ACI. 0,147
223ACIs 2011ACIS 2011 Manual of concrete PracticeACI. 0,185
224MCP-2012CD-ROM Version of the ACI Manual of Concrete PracticeACI.0,193
225MCP 2013CD-ROM Version of the ACI Manual of Concrete PracticeACI.0,216
226MCP 2014CD-ROM Version of the ACI Manual of Concrete PracticeACI.0,244
232SAIE – 2014Tecniche innovative per il miglioramento sismico di edifici prefabbricati Atti del Workshop 22 ottobre 2014 SAIE Bologna 2014 Marco Prisco, Roberto Realfonzo e Paolo RivaACI.0,258
233SAIE – 2014Innovation In Concrete Structures and Cementitious Materials SAIE, Bologna, October 23, 2014 Editors Pietro G. Gambarova, Roberto RealfonzoACI.0,259